View LXM3-PW51_7534497.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

luxeon ? rebel illumination portfolio ansi binned with minimum cri lu xeo n r ebel illumination portfolio optimized solutions for illumination applications technical datasheet ds63 introduction the luxeon ? rebel illumination portfolio emitters in this datasheet deliver optimized combinations of light quality and light output needed for todays lighting applications. in addition to delivering specifed correlated color temperature and color rendering combinations, these emitters deliver the effcacy, lifetime and reliability that all luxeon rebel leds are renowned for. this document contains the performance data needed to design and engineer luxeon rebel based applications. luxeon rebel illumination portfolio products ? specifed cct & cri combinations ? ansi compliant quarter and micro binning ? exceed energy star ? lumen maintenance requirements ? high effcacy for sustainable design ? more light delivered at operating temperature ? recognized under the component recognition program of underwriters laboratories inc. ul listing e327436 .
luxeon rebel ansi binned datasheet ds63 20121212 2 general product information ..................................................................................................................................... 3 product nomenclature ........................................................................................................................................ 3 environmental compliance ................................................................................................................................. 3 product selection .................................................................................................................................................. 4 optical characteristics ................................................................................................................................................ 5 electrical characteristics ............................................................................................................................................. 6 absolute maximum ratings ................................................................................................................................ 8 jedec moisture sensitivity ................................................................................................................................. 8 refow soldering characteristics .............................................................................................................................. 9 mechanical dimensions ............................................................................................................................................. 10 pad confguration .............................................................................................................................................. 11 solder pad design ............................................................................................................................................... 11 relative spectral distribution vs. wavelength characteristics ......................................................................... 12 light output characteristics over temperature .................................................................................................. 17 typical forward current characteristics .............................................................................................................. 19 current derating curves .......................................................................................................................................... 20 typical radiation patterns ......................................................................................................................................... 21 emitter pocket tape packaging ................................................................................................................................. 23 emitter reel packaging .............................................................................................................................................. 24 product binning and labeling ................................................................................................................................... 25 luxeon rebel ansi 1/16 th micro bin structure .............................................................................................. 26 luxeon rebel ansi 1/4 th quadrant bin structure .......................................................................................... 27 luxeon rebel ansi 1/16 th micro bin coordinates ......................................................................................... 29 luxeon rebel ansi 1/4 th quadrant bin coordinates for lxm7-pw40 emitter ..................................... 30 forward voltage bins .................................................................................................................................................. 33 table of contents
luxeon rebel ansi binned datasheet ds63 20121212 3 product nomenclature luxeon rebel illumination emitters are tested and binned at 350 ma, with current pulse duration of 20 ms. all characteristic charts where the thermal pad is kept at constant temperature (25oc typically) are measured with current pulse duration of 20 ms. under these conditions, junction temperature and thermal pad temperature are the same. the luxeon rebel illumination portfolio is a series of power led emitters designed for illumination. the part number designations for the lxml and lxm3 series is explained as follows: l x m l - a b c d and l x m 3 - a b c d where: a designates radiation pattern (value p for lambertian) b designates color (w for white) c designates nominal cct d designates test current (value 1 for 350 ma) the part number designations for the lxm7 and lxm8 series is explained as follows: l x m a - b c d e where: a designates minimum cri performance (value 7 = 70 minimum and 8 = 80 minimum) b designates radiation pattern (value p = lambertian) c designates color (value w = white) d & e designates nominal ansi cct (value 27 = 2700k, 30 = 3000k and 40 = 4000k) therefore products tested and binned at 350 ma follow the part numbering schemes: l x m l - p x x 1, l x m 3 - p x x 1 and l x m x - p w x x average lumen maintenance characteristics lumen maintenance for solid-state lighting devices (leds) is typically defned in terms of the percentage of initial light output remaining after a specifed period of time. philips lumileds projects that luxeon rebel products will deliver, on average, 70% lumen maintenance (l70) at 50,000 hours of operation at a forward current of up to 700 ma. this projection is based on constant current operation with junction temperature maintained at or below 135c. this performance is based on independent test data, philips lumileds historical data from tests run on similar material systems, and internal luxeon reliability testing. observation of design limits included in this data sheet is required in order to achieve this projected lumen maintenance. environmental compliance philips lumileds is committed to providing environmentally friendly products to the solid-state lighting market. luxeon rebel is compliant to the european union directives on the restriction of hazardous substances in electronic equipment, namely reach and the rohs directive. philips lumileds will not intentionally add the following restricted materials to the luxeon rebel: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (pbb) or polybrominated diphenyl ethers (pbde). general product information
luxeon rebel ansi binned datasheet ds63 20121212 4 product selection for luxeon rebel thermal pad temperature = 25c table 1. minimum typical luminous luminous part minimum typical typical flux (lm) flux nominal cct number cri cri r9 f v f v 2700k lxm3-pw81 80 85 18 65 73 2700k lxm8-pw27 80 85 15 70 80 3000k lxm8-pw30 80 85 15 75 85 3000k lxm3-pw71 80 85 22 66 77 3000k lxml-pw71 85 90 50 66 3500k lxm3-pw61 80 85 30 67 80 4000k lxml-pw51 60 70 90 105 4000k LXM3-PW51 80 85 28 75 85 4000k lxm7-pw40 70 75 7 90 100 5000k lxml-pw31 65 70 90 105 5700k lxml-pw21 65 70 90 105 6500k lxml-pw11 65 70 90 105 notes for table 1: - philips lumileds maintains a tolerance of 6.5% on luminous fux and 2 on cri measurements. - test current is 350 ma for all lxml-pxx1, lxm3-pxx1 and lxmx-pwxx products. product selection
luxeon rebel ansi binned datasheet ds63 20121212 5 luxeon rebel at test current [1, 5] thermal pad temperature = 25c table 2. typical total typical color temperature [2] included viewing cct angle [3] angle [4] nominal (degrees) (degrees) cct min. typ. max. u 0.90v 2 u 1/2 2700k 2580k 2725k 2870k 160 120 3000k 2870k 3045k 3220k 160 120 3500k 3220k 3465k 3710k 160 120 4000k 3710k 3985k 4260k 160 120 5000k 4745k 5028k 5311k 160 120 5700k 5310k 5665k 6020k 160 120 6500k 6020k 6530k 7040k 160 120 notes for table 2: 1. test current is 350 ma for all lxml-pxx1, lxm3-pxx1 and lxmx-pwxx products. 2. cct 5% tester tolerance. 3. total angle at which 90% of total luminous fux is captured. 4. viewing angle is the off axis angle from lamp centerline where the luminous intensity is ? of the peak value. 5. all white products are built with indium gallium nitride (ingan). optical characteristics
luxeon rebel ansi binned datasheet ds63 20121212 6 electrical characteristics at 350 ma for luxeon rebel thermal pad temperature = 25oc table 3. typical temperature typical coeffcient of thermal forward resistance forward voltage v f [1] voltage [2] junction to (v) (mv/c) thermal pad (c/w) part numbers min. typ. max. d v f / d t j r u j-c lxm3-pw81 2.55 3.00 3.99 -2.0 to -4.0 10 lxm3-pw71 2.55 3.00 3.99 -2.0 to -4.0 10 lxml-pw71 2.55 3.00 3.99 -2.0 to -4.0 10 lxm3-pw61 2.55 3.00 3.99 -2.0 to -4.0 10 LXM3-PW51 2.55 3.00 3.99 -2.0 to -4.0 10 lxml-pw51 2.55 3.00 3.99 -2.0 to -4.0 10 lxml-pw31 2.55 3.00 3.99 -2.0 to -4.0 10 lxml-pw21 2.55 3.00 3.99 -2.0 to -4.0 10 lxml-pw11 2.55 3.00 3.99 -2.0 to -4.0 10 lxm7-pw40 2.50 3.00 3.50 -2.0 to -4.0 10 lxm8-pw27 2.50 3.00 3.50 -2.0 to -4.0 10 lxm8-pw30 2.50 3.00 3.50 -2.0 to -4.0 10 notes for table 3: 1. philips lumileds maintains a tolerance of 0.06v on forward voltage measurements. 2. measured between 25c = t j = 110c at i f = 350 ma. electrical characteristics
luxeon rebel ansi binned datasheet ds63 20121212 7 typical electrical characteristics at 700 ma for luxeon rebel thermal pad temperature = 25oc table 4. typical forward voltage v f [1] part numbers (v) lxm3-pw81 3.20 lxm3-pw71 3.20 lxml-pw71 3.20 lxm3-pw61 3.20 LXM3-PW51 3.20 lxml-pw51 3.20 lxml-pw31 3.20 lxml-pw21 3.20 lxml-pw11 3.20 lxm7-pw40 3.20 lxm8-pw27 3.20 lxm8-pw30 3.20 notes for table 4: 1. philips lumileds maintains a tolerance of 0.06v on forward voltage measurements.
luxeon rebel ansi binned datasheet ds63 20121212 8 absolute maximum ratings table 5. parameter maximum performance dc forward current (ma) [3] 700 peak pulsed forward current (ma) [3] 700 average forward current (ma) [3] 700 esd sensitivity < 8000v human body model (hbm) class 3a jesd22-a114-e led junction temperature [1] [3] 135c operating case temperature at 350 ma -40c - 135c storage temperature -40c - 135c soldering temperature jedec 020c 260c allowable refow cycles 3 autoclave conditions 121c at 2 atm 100% relative humidity for 96 hours maximum reverse voltage (vr) see note 2 notes for table 5: 1. proper current derating must be observed to maintain junction temperature below the maximum. 2. luxeon rebel leds are not designed to be driven in reverse bias. 3. maximum ratings of 1000 ma forward drive current or led junction temperature of 150c can be applied for device operation not to exceed 60 seconds. jedec moisture sensitivity table 6. soak requirements level floor life standard time conditions time conditions 1 unlimited [ 30c / 168h 85c / 85% 85% rh + 5 / -0 rh
luxeon rebel ansi binned datasheet ds63 20121212 9 temperature profle for table 7. table 7. profle feature lead free assembly average ramp-up rate (ts max to t p ) 3c / second max preheat temperature min (ts min ) 150c preheat temperature max (ts max ) 200c preheat time (ts min to ts max ) 60 - 180 seconds temperature (t l ) 217c time maintained above temperature t l (t l ) 60 - 150 seconds peak / classifcation temperature (t p ) 260c time within 5c of actual peak temperature (t p ) 20 - 40 seconds ramp - down rate 6c / second max time 25c to peak temperature 8 minutes max note for table 7: - all temperatures refer to the application printed circuit board (pcb), measured on the surface adjacent to the package body. refow soldering characteristics jedec 020c
luxeon rebel ansi binned datasheet ds63 20121212 10 mechanical dimensions figure 1. package outline drawing. notes for figure 1: - do not handle the device by the lenscare must be taken to avoid damage to the lens or the interior of the device that can be damaged by excessive force to the lens. - drawings not to scale. - all dimensions are in millimeters. - the thermal pad is electrically isolated from the anode and cathode contact pads.
luxeon rebel ansi binned datasheet ds63 20121212 11 pad confguration note for figure 2: - the thermal pad is electrically isolated from the anode and cathode contact pads. solder pad design note for figure 3: - the photograph below shows the recommended luxeon rebel layout on printed circuit board (pcb). this design easily achieves a thermal resistance of 7 k/w. - application brief ab32 provides extensive details for this layout. in addition, the .dwg fles are available at www.philipslumileds.com and www.philipslumileds.cn.com. figure 2. pad confguration. figure 3. solder pad layout. 3 12 to p 3 21 bo tt om 3 thermal 2 anode 1 ca thode pa d function
luxeon rebel ansi binned datasheet ds63 20121212 12 relative spectral distribution vs. wavelength characteristics lxm8-pw27 (2700k) at test current, thermal pad temperature = 25c lxm3-pw81 (2700k) at test current, thermal pad temperature = 25c 0 0. 2 0. 4 0. 6 0. 8 1 350 400 450 500 550 6006 50 7007 50 800 wa ve le ng t h (n m) re la ti ve s pec tr al powe r di st ri buti on figure 4. color spectrum of lxm8-pw27 emitter, integrated measurement. 0 0. 2 0. 4 0. 6 0. 8 1 3504 00 450 500 550 600 650 7007 50 800 wa ve leng th (n m) r elat iv e spec tr al po wer dist ri buti on figure 5. color spectrum of lxm3-pw81 emitter, integrated measurement.
luxeon rebel ansi binned datasheet ds63 20121212 13 relative spectral distribution vs. wavelength characteristics, continued lxm3-pw71 (3000k) at test current, thermal pad temperature = 25c lxml-pw71 (3000k) at test current, thermal pad temperature = 25c 0 0. 2 0. 4 0. 6 0. 8 1 3504 00 4505 00 5506 00 6507 00 7508 00 wa ve le ng th (n m) re lav e spectr al po wer di st ribuon figure 6. color spectrum of lxm3-pw71 emitter, integrated measurement. 0 0. 2 0. 4 0. 6 0. 8 1 3504 00 4505 00 5506 00 6507 00 7508 00 wa ve le ng th (n m) re lav e spectr al po wer di st ribuon figure 7. color spectrum of lxml-pw71 emitter, integrated measurement.
luxeon rebel ansi binned datasheet ds63 20121212 14 relative spectral distribution vs. wavelength characteristics, continued lxm8-pw30 (3000k) at test current, thermal pad temperature = 25c lxm3-pw61 (3500k) at test current, thermal pad temperature = 25c 0 0. 2 0. 4 0. 6 0. 8 1 350 4004 50 500 5506 00 6507 00 750 800 wa velengt h (n m) re lati ve sp ec tr al po wer dist ri but ion figure 9. color spectrum of lxm3-pw61 emitter, integrated measurement. 0 0. 2 0. 4 0. 6 0. 8 1 350 400 450 500 550 600 650 700 750 800 wa ve le ng t h (n m) re la ti ve spec tr al powe r di st ri but io n figure 8. color spectrum of lxm8-pw30 emitter, integrated measurement.
luxeon rebel ansi binned datasheet ds63 20121212 15 relative spectral distribution vs. wavelength characteristics, continued lxm7-pw40 (4000k) at test current, thermal pad temperature = 25c LXM3-PW51 (4000k) at test current, thermal pad temperature = 25c 0. 0 0. 2 0. 4 0. 6 0. 8 1. 0 3504 00 450 500 5506 00 650 7007 50 800 wa ve le ng th (n m) rela v es pe ct ra l po we r di st ri bu on figure 10. color spectrum of lxm7-pw40 emitter, integrated measurement. 0 0. 2 0. 4 0. 6 0. 8 1 3504 00 4505 00 550 600 650 700 750 800 wa ve le ng th (n m) re lav e spectr al po wer di st ribuon figure 11. color spectrum of LXM3-PW51 emitter, integrated measurement.
luxeon rebel ansi binned datasheet ds63 20121212 16 relative spectral distribution vs. wavelength characteristics, continued lxml-pw51 (4000k) at test current, thermal pad temperature = 25c lxml-pw31 (5000k), lxml-pw21 (5700k) and lxml-pw11 (6500k) at test current, thermal pad temperature = 25c 0 0. 2 0. 4 0. 6 0. 8 1 3504 00 4505 00 550 600 650 700 750 800 wa ve le ng th (n m) re lav e spectr al po wer di st ribuon figure 12. color spectrum of lxml-pw51 emitter, integrated measurement. 0 0. 2 0. 4 0. 6 0. 8 1 3504 00 4505 00 5506 00 6507 00 7508 00 wa ve le ng th (n m) re lav e spectr al po wer di st ribuon figure 13. color spectrum of lxml-pw31, lxml-pw21 and lxml-pw11 emitters, integrated measurement.
luxeon rebel ansi binned datasheet ds63 20121212 17 light output characteristics over temperature all parts except lxml-pw51 at test current lxml-pw51 at test current no rm a liz ed lum i nous flux if = 350 ma , me an a nd +/ - 3 st d de v 0. 70 0. 80 0. 90 1. 00 1. 10 -2 50 25 50 75 10 01 25 the rmal pa d te mp erat ur e (c) no r mal iz ed lum inou s f lux 350 ma figure 14. relative light output vs. thermal pad temperature. no rm a liz ed lum i nous flux if = 350 ma , me an a nd +/ - 3 st d de v 0. 70 0. 80 0. 90 1. 00 1. 10 -2 50 25 50 75 100 125 the rmal pa d te mp erat ur e (c) no r mal iz ed lum inous flux 350 ma figure 15. relative light output vs. thermal pad temperature.
luxeon rebel ansi binned datasheet ds63 20121212 18 typical effcacy vs. junction temperature 60 65 70 75 80 85 -2 50 25 50 75 100 125 ty pi ca l ef fi ca cy ( lm /w ) ju nc ti on te mp er at ur e c fo rw ar d cu rre nt 350 ma o figure 16. lxm8-pw27 and lxm8-pw30 emitters effcacy versus juntion temperature. light output characteristics over temperature, continued
luxeon rebel ansi binned datasheet ds63 20121212 19 typical forward current characteristics typical forward current characteristics thermal pad temperature = 25c typical relative luminous flux vs. forward current thermal pad temperature = 25c 1000 1200 600 800 1000 1200 w ard current (ma) 0 200 400 600 800 1000 1200 24 26 28 3 32 34 36 forward current (ma) 0 200 400 600 800 1000 1200 2.4 2.6 2.8 3 3.2 3.4 3.6 forward current (ma) forward voltage (v) figure 17. forward current vs. forward voltage. 2.00 2.25 2.50 1 00 1.25 1.50 1.75 2.00 2.25 2.50 l uminous flux 0 00 0.25 0.50 0.75 1.00 1.25 1.50 1.75 2.00 2.25 2.50 relative luminous flux 0.00 0.25 0.50 0.75 1.00 1.25 1.50 1.75 2.00 2.25 2.50 0 200 400 600 800 1000 1200 relative luminous flux forward current (ma) figure 18. typical relative luminous fux vs. forward current, thermal pad temperature = 25oc.
luxeon rebel ansi binned datasheet ds63 20121212 20 current derating curves current derating curve for 350 ma drive current current derating curve for 700 ma drive current 300 350 400 a) 150 200 250 300 350 400 o rward current (ma) 15c/w 25c/w 0 50 100 150 200 250 300 350 400 0 25 50 75 100 125 150 175 i f - forward current (ma) 15c/w 25c/w 35c/w 45c/w 0 50 100 150 200 250 300 350 400 0 25 50 75 100 125 150 175 i f - forward current (ma) t a - ambient temperature ( c) 15c/w 25c/w 35c/w 45c/w figure 19. maximum forward current vs. ambient temperature, based on t jmax = 150oc. 600 700 800 m a) 300 400 500 600 700 800 forward current (ma) 15c/w 25c/w 0 100 200 300 400 500 600 700 800 0 25 50 75 100 125 150 175 i f - forward current (ma) 15c/w 25c/w 35c/w 0 100 200 300 400 500 600 700 800 0 25 50 75 100 125 150 175 i f - forward current (ma) t a - ambient temperature ( c) 15c/w 25c/w 35c/w figure 20. maximum forward current vs. ambient temperature, based on t jmax = 150oc.
luxeon rebel ansi binned datasheet ds63 20121212 21 typical radiation patterns typical spatial radiation pattern for lambertian typical polar radiation pattern for lambertian 80% 90% 100% 40% 50% 60% 70% 80% 90% 100% e lative intensity (%) 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 9 0 7 5 6 0 4 5 3 0 1 5 0 1 5 3 0 4 5 6 0 7 5 9 0 relative intensity (%) 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% -90 -75 -60 -45 -30 -15 0 15 30 45 60 75 90 relative intensity (%) angular displacement (deg) figure 21. typical representative spatial radiation pattern for lambertian. 0 20 % 40 % 60 % 80 % 100 % 0o 30o 60o 90o - 30o - 60o - 90o figure 22. typical polar radiation pattern for lambertian.
luxeon rebel ansi binned datasheet ds63 20121212 22 typical radiation patterns, continued typical color vs. viewing angle typical du and dv color variation vs. viewing angle -0. 015 -0. 010 -0. 005 0. 000 0. 005 0. 010 0. 015 -9 0- 75 -6 0- 45 -3 0- 15 01 53 04 56 07 59 0 no rm al iz ed du' and dv ' vi ew in g an gl e ty pi ca l du' a nd dv ' vs . vi ew ing an gl e ty pical du' ty pical dv ' figure 23. applicable for lxm8-pw27 and lxm8-pw30 emitters. -0. 010 -0. 005 0. 000 0. 005 0. 010 0. 015 0. 020 -0. 020 -0. 015 -0. 010 -0 .0 05 0. 0000 .0 05 0. 010 ty pi ca l v' ty pi ca l u' ty pi ca l du' ve rs us dv ' ch ar ac teris c ve rs us an gl e (0 to 90 de gr ees ) fo r lx m8 seri es . ma xi mu m du' v' de vi a on wi th in re ct an gu la r ma sk (u ' 0 to -0 .0 1, v' -0 .0 05 to 0. 01) no rm a lized to 0 de gr ee s (o n ax is ) at 0, 0 figure 24. applicable for lxm8-pw27 and lxm8-pw30 emitters.
luxeon rebel ansi binned datasheet ds63 20121212 23 emitter pocket tape packaging figure 25. emitter pocket tape packaging. 50 1000 20
luxeon rebel ansi binned datasheet ds63 20121212 24 emitter reel packaging figure 26. emitter reel packaging.
luxeon rebel ansi binned datasheet ds63 20121212 25 product binning and labeling purpose of product binning in the manufacturing of semiconductor products, there is a variation of performance around the average values given in the technical data sheets. for this reason, philips lumileds bins the led components for luminous fux, color and forward voltage (v f ). decoding product bin labeling luxeon rebel emitters are labeled using a four digit alphanumeric code (cat code) depicting the bin values for emitters packaged on a single reel. all emitters packaged within a reel are of the same 3-variable bin combination. using these codes, it is possible to determine optimum mixing and matching of products for consistency in a given application. reels of 2700k, 3000k, 3500k, 4000k, 5000k, 5700k, 6500k emitters are labeled with a four digit alphanumeric cat code following the format below. abcd a = flux bin (j, k, l, m etc.) b and c = color bin (for example 5a, 5b, 5c are ansi quadrant color bins for lxml and lxm3 series, 5w, 5x, 5y are ansi quadrant color bins for lxm7 emitter and 8e, 8f, 8g are ansi 1/16th micro color bins for the lxm8 series.) d = v f bin (where c, d, e are for lxml and lxm3 series 0.24v forward voltage bins, and p, r, s are for lxm7 and lxm8 series 0.25v forward voltage bins.) luminous flux bins table 8 lists the standard photometric luminous fux bins for luxeon rebel emitters (tested and binned at 350 ma). although several bins are outlined, product availability in a particular bin varies by production run and by product performance. not all bins are available in all colors. table 8. flux bins - all colors minimum photometric flux maximum photometric flux bin code (lm) (lm) h 50 60 j 60 * 70 k 70 ** 80 l 80 90 m 90 100 n 100 110 x 110 120 p 120 130 y 130 140 q 140 150 r 150 160 * 65 lm for lxm3-pw81, 66 lm for lxm3-pw71, 67 lm for lxm3-pw61 ** 75 lm for lxm8-pw30 and LXM3-PW51
luxeon rebel ansi binned datasheet ds63 20121212 26 luxeon rebel ansi 1/16 th micro bin structure ansi 1/16th micro bin structure for lxm8-pw27 and lxm8-pw30 emitters y x 0.28 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.44 0.46 0.48 0.50 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.44 0.46 2700k 3000k 3500k 4000k 4500k 5000k 5700k 6500k 6530k 510k 5665k 355k 5028k 283k 4503k 243k 3985k 275k 3465k 245k 3045k 175k 2725k 145k 7f 7g 7h 7j 7e 7m 7l 7k 8f 8g 8h 8j 8e 8m 8l 8k 4b 4a 3b 3a 2b 2a 1b 1a 4c 6c 6d 5c 5d 6a 6b 5a 5b 4d 3c 3d 2c 2d 1c 1d blackbody locus figure 27. luxeon rebel ansi 1/6th micro bin structure.
luxeon rebel ansi binned datasheet ds63 20121212 27 luxeon rebel ansi 1/4 th quadrant bin structure ansi 1/4th quadrant bin structure for lxm7-pw40 emitter x y 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.35 0.37 0.38 0.39 0.40 0.41 0.36 0.42 3985k 275k 4000k 5y 5z 5x 5w blackbody locus figure 28. luxeon rebel ansi 1/4th quadrant bin structure (lxm7-pw40 emitter only).
luxeon rebel ansi binned datasheet ds63 20121212 28 luxeon rebel ansi 1/4 th quadrant bin structure, continued ansi 1/4th quadrant bin structure for lxm3-pw81, lxm3-pw71, lxml-pw71, lxm3-pw61, LXM3-PW51, lxml-pw51, lxml-pw31, lxml-pw21 and lxml-pw11 emitters figure 29. luxeon rebel ansi 1/4th quadrant bin structure.
luxeon rebel ansi binned datasheet ds63 20121212 29 table 9. luxeon rebel ansi 1/16th micro bin structure coordinates nominal cct bin code x y nominal cct bin code x y 0.446470 0.407117 0.422300 0.398950 8e 0.452542 0.408716 7e 0.428413 0.401125 0.447668 0.399645 0.424381 0.392250 0.441885 0.398209 0.418500 0.390175 0.451335 0.416559 0.426100 0.407725 8f 0.457504 0.418094 7f 0.432444 0.410000 0.452542 0.408716 0.428413 0.401125 0.446470 0.407117 0.422300 0.398950 0.457504 0.418094 0.432444 0.410000 8g 0.463673 0.419630 7g 0.438788 0.412275 0.458614 0.410315 0.434525 0.403300 0.452542 0.408716 0.428413 0.401125 0.463673 0.419630 0.438788 0.412275 8h 0.469650 0.420941 7h 0.445131 0.414550 0.464284 0.411458 0.440638 0.405475 0.458614 0.410315 0.434525 0.403300 0.469650 0.420941 0.445131 0.414550 8j 0.475627 0.422251 7j 0.451475 0.416825 0.469954 0.412602 0.446750 0.407650 0.464284 0.411458 0.440638 0.405475 0.464284 0.411458 0.440638 0.405475 8k 0.469954 0.412602 7k 0.446750 0.407650 0.464627 0.403501 0.442025 0.398475 0.459039 0.402291 0.436144 0.396400 0.458614 0.410315 0.434525 0.403300 8l 0.464284 0.411458 7l 0.440638 0.405475 0.459039 0.402291 0.436144 0.396400 0.453450 0.401081 0.430263 0.394325 0.452542 0.408716 0.428413 0.401125 8m 0.458614 0.410315 7m 0.434525 0.403300 0.453450 0.401081 0.430263 0.394325 0.447668 0.399645 0.424381 0.392250 notes for table 9: - philips lumileds maintains a tester tolerence of 0.005 on x, y color coordinates. - applicable for lxm8-pw27 and lxm8-pw30 emitters. luxeon rebel ansi 1/16 th micro bin coordinates 2700k 3000k
luxeon rebel ansi binned datasheet ds63 20121212 30 luxeon rebel ansi 1/4 th quadrant bin coordinates for lxm7-pw40 emitter luxeon rebel emitters are tested and binned by x,y coordinates. 4 color bins, cct range 3710k to 4260k table 10. luxeon rebel ansi 1/4th quadrant bin coordinates for lxm7-pw40 emitter nominal cct bin code x y 0.382750 0.380300 5w 0.370300 0.372600 0.367000 0.357800 0.378400 0.364700 0.382750 0.380300 5x 0.387100 0.395900 0.373600 0.387400 0.370300 0.372600 0.382750 0.380300 5y 0.395200 0.388000 0.400600 0.404400 0.387100 0.395900 0.382750 0.380300 5z 0.378400 0.364700 0.389800 0.371600 0.395200 0.388000 4000k
luxeon rebel ansi binned datasheet ds63 20121212 31 luxeon rebel ansi 1/4 th quadrant bin coordinates, continued luxeon rebel emitters are tested and binned by x,y coordinates. 32 color bins, cct range 2580k to 7040k table 11. luxeon rebel ansi 1/4th quadrant bin coordinates nominal cct bin code x y nominal cct bin code x y 0.458614 0.410315 0.408216 0.392153 8a 0.446470 0.407117 6a 0.394131 0.384815 0.437300 0.389300 0.388900 0.369000 0.448286 0.391847 0.401706 0.375155 0.468732 0.428946 0.414622 0.408937 8b 0.456200 0.426000 6b 0.399600 0.401500 0.446470 0.407117 0.394131 0.384815 0.458614 0.410315 0.408216 0.392153 0.481300 0.431900 0.429900 0.416500 8c 0.468732 0.428946 6c 0.414622 0.408937 0.458614 0.410315 0.408216 0.392153 0.469954 0.412602 0.422071 0.398417 0.469954 0.412602 0.422071 0.398417 8d 0.458614 0.410315 6d 0.408216 0.392153 0.448286 0.391847 0.401706 0.375155 0.459300 0.394400 0.414700 0.381400 0.434392 0.403186 0.381883 0.377641 7a 0.422071 0.398417 5a 0.369655 0.369740 0.414700 0.381400 0.367000 0.357800 0.425959 0.385336 0.378297 0.364637 0.442994 0.421230 0.386955 0.395809 7b 0.429900 0.416500 5b 0.373600 0.387400 0.422071 0.398417 0.369655 0.369740 0.434392 0.403186 0.381883 0.377641 0.456200 0.426000 0.400600 0.404400 7c 0.442994 0.421230 5c 0.386955 0.395809 0.434392 0.403186 0.381883 0.377641 0.446470 0.407117 0.394131 0.384815 0.446470 0.407117 0.394131 0.384815 7d 0.434392 0.403186 5d 0.381883 0.377641 0.425959 0.385336 0.378297 0.364637 0.437300 0.389300 0.389800 0.371600 2700k 3000k 3500k 4000k
luxeon rebel ansi binned datasheet ds63 20121212 32 table 11, continued. luxeon rebel ansi 1/4th quadrant bin coordinates nominal cct bin code x y nominal cct bin code x y 0.361112 0.363778 0.329231 0.338226 4a 0.352638 0.357500 2a 0.321708 0.331406 0.351200 0.346500 0.322200 0.324300 0.359037 0.352105 0.329330 0.330539 0.364112 0.380435 0.329053 0.353812 4b 0.354800 0.373600 2b 0.320700 0.346200 0.352638 0.357500 0.321708 0.331406 0.361112 0.363778 0.329231 0.338226 0.373600 0.387400 0.337600 0.361600 4c 0.364112 0.380435 2c 0.329053 0.353812 0.361112 0.363778 0.329231 0.338226 0.369655 0.369740 0.336916 0.344873 0.369655 0.369740 0.336916 0.344873 4d 0.361112 0.363778 2d 0.329231 0.338226 0.359037 0.352105 0.329330 0.330539 0.367000 0.357800 0.336600 0.336900 0.344719 0.351301 0.313640 0.323739 3a 0.336916 0.344873 1a 0.305852 0.315982 0.336600 0.336900 0.306800 0.311300 0.343985 0.342749 0.314359 0.318612 0.346260 0.368726 0.311529 0.339129 3b 0.337600 0.361600 1b 0.302800 0.330400 0.336916 0.344873 0.305852 0.315982 0.344719 0.351301 0.313640 0.323739 0.355100 0.376000 0.320500 0.348100 3c 0.346260 0.368726 1c 0.311529 0.339129 0.344719 0.351301 0.313640 0.323739 0.352638 0.357500 0.321708 0.331406 0.352638 0.357500 0.321708 0.331406 3d 0.344719 0.351301 1d 0.313640 0.323739 0.343985 0.342749 0.314359 0.318612 0.351500 0.348700 0.322100 0.326100 notes for table 11: - philips lumileds maintains a tester tolerence of 0.005 on x, y color coordinates. - applicable for lxm3-pw81, lxm3-pw71, lxml-pw71, lxm3-pw61, LXM3-PW51, lxml-pw51, lxml-pw31, lxml-pw21 and lxml-pw11 emitters. luxeon rebel ansi 1/4 th quadrant bin coordinates, continued 4500k 5700k 5000k 6500k
luxeon rebel ansi binned datasheet ds63 20121212 33 forward voltage bins tables 12 and 13 list minimum and maximum v f bin values per emitter. although several bins are outlined, product availability in a particular bin varies by production run and by product performance. table 12. v f bins minimum forward voltage maximum forward voltage bin code (v) (v) b 2.55 2.79 c 2.79 3.03 d 3.03 3.27 e 3.27 3.51 f 3.51 3.75 g 3.75 3.99 note for table 12: - applicable for lxm3-pw81, lxm3-pw71, lxml-pw71, lxm3-pw61, LXM3-PW51, lxml-pw51, lxml-pw31, lxml-pw21 and lxml-pw11 emitters. table 13. v f bins minimum forward voltage maximum forward voltage bin code (v) (v) p 2.50 2.75 r 2.75 3.00 s 3.00 3.25 t 3.25 3.50 note for table 13: - applicable for lxm7 and lxm8 series emitters.
company information ?2012 philips lumileds lighting company. all rights reserved. product specifcations are subject to change without notice. luxeon is a registered trademark of the philips lumileds lighting company in the united states and other countries. philips lumileds is a leading provider of leds for everyday lighting applications. the companys records for light output, effcacy and thermal management are direct results of the ongoing commitment to advancing solid-state lighting technology and enabling lighting solutions that are more environmentally friendly, help reduce co 2 emissions and reduce the need for power plant expansion. philips lumileds luxeon ? leds are enabling never before possible applications in outdoor lighting, shop lighting, home lighting, consumer electronics, and automotive lighting. philips lumileds is a fully integrated supplier, producing core led material in all three base colors, (red, green, blue) and white. philips lumileds has r&d centers in san jose, california and in the netherlands, and production capabilities in san jose, singapore and penang, malaysia. founded in 1999, philips lumileds is the high fux led technology leader and is dedicated to bridging the gap between solid-state technology and the lighting world. more information about the companys luxeon led products and solid-state lighting technologies can be found at www.philipslumileds.com. www.philipslumileds.com www.philipslumileds.cn.com

▲Up To Search▲

Price & Availability of LXM3-PW51

	To Download LXM3-PW51 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .